Fire Retardant Aluminum Composite Panel (A2, Aluminum Core)

ALUMINUM CORE PANEL (GRADE A2)

Expand your creative horizons with the richness and vibrancy of Aluminum Core Panel. Our extensive selection of surface treatments and coil painting or natural metals enable you to create designs and effects that no other panel system can achieve. Whether you are looking for traditional solid color, satin finish, wood finish, stone finish, metallic color or any other customized color, Aluminum Core Panel, with our combination of unique coating and painting technology, can create the facade you want.

PRODUCT INTRODUCTION

WELLBOND Aluminum Core Panel introduces science and technology from Germany, shows excellent product properties such as extraordinary flatness, a large variety of colors and perfect form ability. It has been developed as a rigid and, at the same time, flexible material for architecture. Aluminum Core Panel is weather proof, and ensures easy and fast installation. As a light composite material consisting of two aluminum cover sheets (up to H19 aluminum) and an aluminum core, the versatile Aluminum Core Panel product is a material also preferred in areas other than architecture, such as furniture, kitchen, navigation and aviation industry, etc.

1. NON-COMBUSTIBLE

The panel contains an improved fire safety core, and meets or exceeds the fire safety mandatory requirements for exterior and interior for all architectural buildings used in most countries.

2. LIGHT WEIGHT

The weight of Aluminum Core Panel is reduced by 30% compare to Aluminum composite panel (core with plastic) with equivalent rigidity.

3. FLEXIBLE & LONG LASTING

Aluminum Core Panel easy routed, drilled, punched, cut, bent, curved and precisely formed via these and other fabrication techniques. 20 years warranty makes it an excellent long term solution.

4. WEATHER RESISTANCE

Aluminum Core Panel uses nano tech PVDF painting, which has the unique advantage in the weather resistance, both in the hot sun or cold wind and snow, do not detract from the beautiful appearance, can reach 20 years not fade.

5. FLATNESS & HIGH STRENGTH

Aluminum Core Panel is excellent in surface smoothness and retains consistency of color. The continuous laminating process results in excellent flatness of the panel by eliminating small distortions remaining in the thin aluminum.

6. PEEL STRENGTH

Aluminum Core Panel adopts the new technology and reaches the most critical technical indicators peel strength, quality, flatness and weather resistance of the panel are improved into the best situation.

7. EASY PROCESS

The processing of the Aluminum Core Panel is simple. Cutting, bending and fixing with rivet is just the same as traditional ACP. The product can be processed at the construction site to reduce the transportation cost.

THE CHARACTERISTICS OF ALUMINUM CORE PANEL: GREEN ENVIRONMENTAL PROTECTION, ZERO CARBON AND FIRE PROOF.

Aluminum Core Panel is a composite panel consisting of two aluminum cover sheets and an aluminum core. The superb properties of this material boost one’s inspiration and offer architects a whole new range of solution-whether your project is a private home, public building, corporate headquarter offices, trading or industrial complex-or if your organization wants to create a new image-building corporate design-whether for petrol stations, car showrooms, banks or supermarkets.

ADVANTAGES

Comparison of thickness and weight of panels with equal rigidity.

FIRE RETARDANT ALUMINUM COMPOSITE PANEL ( A2, ALUMINUM CORE )

■ APPLICATION

WELLBOND is offered in a wide variety of PVDF colors suitable for interior and exterior applications like wall cladding, roofing facades. WELLBOND also replaces the brick watts. Because of the good sound and thermal insulation, the WELLBOND replaces the gypsurn board partition and brick walls. WELLBOND is also used as a clean room panel and in automotive industries.

■ COMPOSITION

Two sheets of aluminum sandwiching a corrugated aluminum core formed in a continuous lamination process. The core material shall be free of voids and/or air spaces and not contain foamed insulation material, Exterior / Surface panel is aluminum sheet coated with PVDF and interior / rear side or back side of panel will be available mill finish / polyester service coal / chromate.

■ ALUMINUM ALLOY SHEETS

Alloy:                    AA3000 Series ( PVDF Painted material )
Core Material:    AA3000 Series
Typical Composition of Aluminum Composite Panel Diagrammatic Representation ).

COATING FINISHES

■ POLY VINYLIDENE DIFLUORIDE PVDF) COATING

A highly non-reactive thermoplastic fluoropolymer produced by the polymerization of vinylidene difluoride. (Guarantee 20 years, back to back with KYNAR/HYLAR).

■ NANO POLY VINYLIDENE DIFLUORIDE ( NANO-PVDF ) COATING

Nanometer panel inherit all features of traditional PVDF panel, like antipollution, cauterization resistance, fastness and so on. Meanwhile, we apply nanometer high technology, which has superior function of self-cleaning, antipollution, acid resistance and alkali-resistance.
(Guarantee 20 years, back to back with KYNAR/HYLAR).

COATING FINISHES

■ POLYESTER COATING

Particularly suitable for closed-pore top coats, they make it possible to achieve a coating film with excellent chemical/physical resistance.
(Guarantee 10 Years, back to back with KYNAR/HYLAR)

■ HIGH-DENSITY POLYETHYLENE (HOPE):

A hydrocarbon polymer prepared from ethylene/petroleum by a catalytic process. It is a kind of thermoplastic which is famous for its tensile strength. Its unique properties can stand high temperatures.
(Guarantee 15 Years, back to back with KYNAR/HYLAR).

■ FEVE ALUMINUM COMPOSITE PANEL COATING:

FEVE aluminum composite panel is a combination of the advantages of PE coating and PVDF coating aluminum composite materials. For instance, its glossy and color brightness is the same as PE coating ACP and its weather resistance is comparable with that of PVDF coating aluminum composite panel.
(Guarantee 17 Years, back to back with KYNAR/HYLAR).

COLOR

Generally, we are manufacturing WELLBOND with various options of color coating, basically we have Four different types of colors such as: Solid / Enamel Colors, Metallic Colors, Natural Finishes (Stone & Timber) and Sparkling Colors.

ProductTotal Panel Thickness (mm)Component Thickness (mm)  
Surface AluminumCore AluminumBack Side Aluminum
WELLBOND30.320.3Alloy AA 3105/3003 – H14Non-Combustible Aluminum Core
40.530.5

PRODUCT DIMENSION

WELLBOND is available in various dimensions however our standard Product is Limm x 1220mm x 2440mm. The other available sizes are as follows:

Dimension Unit Standard Size Available
 Width mm 1220 1000 – 1500
 length mm 2440 < 6000 mm
 Thickness mm 4 3.4

FIRE TESTS

Results of Reaction to Fire Tests
Country Test standard WELLBOND Result & Classification
 UK B5476 Part 6
B5476 Part 7
B5476 Part 4
 3mm, 4mm Class 0
Class 1
Non Combustible
 Germany  DIN4102 Part 1 3mm, 4mm Class A2
 European  EN 13501-1 3mm, 4mm Class A2, S2, D0

Order now